Colex International Limited
UK manufacturers and worldwide exporters of high quality hose and tube.
Different length, colour, size? Need it printed or packed in a certain way? We can make our hose and tube to suit your requirement.
Call Sales on +44 (0) 1858 461 100, take a look at our Custom Manufacture page or fill in a quote request form.
Colex International Ltd. Draw-Flex ™ Chemical Chart
PTFE
NeuVend 4
Hydravend
PVC
20°
60°
20°
60°
20°
60°
20°
60°
Calcium Hydroxide
Ferric Sulphate
Ferric Chloride
Ferric Oxide
Aluminium Chloride
Aluminium Sulphate
Sodium Carbonate (Bicarbonate)
Sodium Phosphate
Sodium Hypochlorite
Sodium Hydroxide
Chlorine Solution 2%
Chlorine Gas
n/d
n/d
n/d
Good Resistance
Predicted Data
OK up to 5% Solution
Minor Effect
OK up to 15% Chlorine Solution
OK up to 50% Solution
Not Suitable
n/d
No Data
* For use as a guide only
Pressures: Values stated are based on the short term burst pressure at 20°C. Any increase in temperature above 20°C will result in a decline in burst pressures.
1 Colex WRAS approved Vendhose is also an option for some applications.
2 PTFE is available in 100m with longer lengths made to order.
3 This is the length possible on readily available drums, should longer lengths be absolutely necessary bespoke drums can be discussed.
4 Vendhose chemical properties similar to NeuVend
IMPORTANT NOTE: Whilst every effort is made to ensure that the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore recommendations are made without warranty or guarantee. Colex reserve the right to change specifications without prior notice.