Colex International Limited
UK manufacturers and worldwide exporters of high quality hose and tube.
Different length, colour, size? Need it printed or packed in a certain way? We can make our hose and tube to suit your requirement.
Call Sales on +44 (0) 1858 461 100, take a look at our Custom Manufacture page or fill in a quote request form.
Colex International Ltd. Vendhose (WRAS approved) for Draw-Flex™ Dual Containment System Technical Data
Sizes below are for illustration purposes only. |
|||||||
ID (mm) |
OD (mm) |
ID Tolerances (mm) |
Burst Pressure * |
Kgs/m |
Bend Radius (mm) * |
Colour |
|
psi |
bar |
||||||
|
6.35 |
11.5 |
+0.25/-0.25 |
1000 |
68.8 |
0.070 |
22 |
Natural liner/natural inner/grey outer cover |
|
10 |
16 |
+0.25/-0.25 |
820 |
56.4 |
0.120 |
37 |
Natural liner/natural inner/grey outer cover |
|
12.5 |
18.5 |
+0.26/-0.25 |
710 |
48.9 |
0.135 |
49 |
Natural liner/natural inner/grey outer cover |
Temperature range –20°C to +85°C * |
|||||||
* For use as a guide only.
Pressures: Values stated are based on the short term burst pressure at 20°C. Any increase in temperature above 20°C will result in a decline in burst pressures.
ALL ORDERS ARE SUBJECT TO MINIMUM ODER QUANTITIES.
IMPORTANT NOTE: Whilst every effort is made to ensure that the above information is accurate and correct, the conditions under which Colex products are used are beyond our control and therefore recommendations are made without warranty or guarantee. Colex reserve the right to change specifications without prior notice.